Modified 50 Head (CR) Design | Barraba, NSW

This yard system design is a modified version of our 50 Head (CR) system. It has been modified slightly to change the position of the ramp. The main yard has also been made slightly smaller while adding an additional yard on the offside of the ramp. It has a total yard area of 185m sq with a working capacity of 50 head and a holding capacity of 120 head.

• Yard Components Included (all manufactured in Australian First Grade Steel - galvanised inside and outside with the highest gal coating for this type of steel on the Australian market:

  • 5 rail panels - 2.5m long x 1.7m high (115mm x 42mm rail).

  • 5 rail gates in frames - 2.5m long x 2.2m high frames (115mm x 42mm rail)

  • Our low noise cleating system.

  • Panel pins.

  • Foot pins.

  • Panels, double hinge gates, double hinge lock-up gates in the drafting pound, single hinge gates and slide gates.

• Yard Upgrades:

  • Upgraded panel posts from 1.6mm to 2.5mm thick material.

  • Upgraded gate on the rear of the force, to a single hinge gate and heavy-duty frame with a spring slam catch.

  • Three way drafting section at the front of the crush (two connected gates (connected overhead) on hinges with tension adjustment, on permanent posts with a heavy duty drop bolt).

• Ramp:

  • 3.6m Timber Floor Loading Ramp complete with:

    • Hardwood timber floor.

    • Ramp sides sheets up to 600mm.

    • Ramp side rails - 115mmx42mm rail

    • Heavy-duty front buffer.

    • Heavy-duty construction overall.

• Crush:

  • CIA M&M Stockyards Ringer Pro-Chute Crush complete with:

    • Full walk-through Mk 5 Headbail sheeted to eliminate leg injury.

    • Full exit gates split horizontally on working side.

    • Front and Rear operation.

    • Yellow handles for operators’ visibility.

    • Full Walk-Through Vet Section.

    • Anti-Backing System.

    • ¾ Sheeted Rear Door.

    • Weigh bar mounting plates.

    • Swing Arm Neck Bar.

    • Pro Chute Floor/Hot Dipped Galvanised.

• Weigh System:

  • Modifications have been made to the yard design to allow for weighing within the crush.

    • Gallagher 5000kg weigh bars with leads.

    • Gallagher W-0 Indicator.