365 Head (CR) Design | Bell Trees, NSW

This yard system design has a total yard area of 1116m sq. It has a working capacity of 365 head and a holding capacity of 780 head.

• Yard Components Included (all manufactured in Australian First Grade Steel - galvanised inside and outside with the highest gal coating for this type of steel on the Australian market:

  • 5 rail panels - 2.5m long x 1.7m high (115mm x 42mm rail).

  • 5 rail gates in frames - 2.5m long x 2.2m high frames (115mm x 42mm rail)

  • Our low noise cleating system.

  • Panel pins.

  • Foot pins.

  • Panels, double hinge gates, double hinge lock-up gates in the drafting pound, single hinge gates and slide gates.

  • Calf Race.

• Yard Upgrades:

  • Upgraded panel posts from 1.6mm to 2.5mm thick material.

  • Upgraded gate on the rear of the force, to a single hinge gate and heavy-duty frame with a spring slam catch.

  • Additional slide gate in the race, one section back from the crush.

  • Forward Operation Manual Drafter at the head of the crush. The drafting gates are controlled by a remote handle that extends to the operational position of the crush. This allows the operator to remain at the head of the crush whilst opening the gate. The selected gate automatically returns with the release of the handle. Two access gates are positioned forward of the drafting gates to provide an unimpeded workspace at the head of the animal.

• Ramp:

  • 5.0m Timber Floor Loading Ramp:

    • 1.4m flat load out section

    • Side access door

    • Base and buffer constructed in 125 x 75 x 3mm galvanised RHS

    • 1.5mm galvanised sheeted sides up to 600mm high

    • Side rails constructed in 115 x 42 x 2mm galvanised oval rail

    • Floor - 4’ x 2’ ironbark hardwood timber floor

    • Double width walkway with handrail on nearside.

    • Double width platform and handrail including ladder on offside with access door.

• Crush:

  • CIA Immobilizer Pro-Chute Crush complete with:

    • Full walk-through Mk 5 Headbail sheeted to eliminate leg injury.

    • Three individual drop-down upper side gates for concentrated access on both sides.

    • Full exit gates split horizontally on both sides.

    • Front operation of rear sliding gate assisting single operation.

    • Extra support bars on lower split gates.

    • Front and rear operation.

    • Yellow handles for operators’ visibility.

    • Full walk-through vet section.

    • Two-sided parallel sided squeeze.

    • Anti-Backing System.

    • Fully sheeted rear door with Autolock.

    • Grease nipples on pivot points.

    • Weigh bar mounting plates.

    • Pro Chute Hot Dipped Galvanised Floor.

    • Swingarm Super Scoop